Izdelki za varnost in (6)

A micro-electromechanical spring-mass-system is continuously measuring the acceleration and transforms the measured data into an analog 4-20mA output signal. The sensor complies with the standards of DIN EN 50155 for railway vehicles. It is espacially intended to be used in the on-board network of rail vehicles. Its extrem rugged housing enables applications in harsh conditions in the outskirt area of the vehicle, directly at the bogie. The sensor impresses by its high ruggedness against impact, dust as well as moisture and guarantees high reliability. The device detects accelerations in a measuring range of ± 4g and operates with 24 Volt supply voltage. Housing:stainless steel Axes:1 Measurment range:4g Supply voltage:24 Sensitivity [mA/g]:2,0

Schallabsorbierende mobile Wände in den Größen : 120x252 cm ; 120x 372 cm ; 240x252 cm ; 240x 372 cm

Unsere Lösung für umfangreiche Zutrittssteuerung: Der KYO Cenloc ermöglicht den Anschluss von bis zu 16 Türen und 64 Zutrittslesern - ideal für Projekte mit vielen Zugangspunkten und hohen Sicherheitsanforderungen. Die Einrichtung und Bedienung sind dank des farbigen TFT-Touch-Displays einfach. Darauf werden auch Ereignismeldungen und Systeminformationen für schnellere Diagnosen und ein besseres Verständnis bereitgestellt. Für jede Tür ist ein separates Anschlussmodul vorgesehen. Dieses beinhaltet die RS485-Leserschnittstelle, das Relais für den Türöffner sowie einen überwachten Eingang für einen Türkontakt. Der KYO Cenloc von Datafox kann nachträglich erweitert werden, und dank Steckmodulen kann dies vom Anwender selbst durchgeführt werden. Module können vor Ort einfach ausgetauscht werden, falls Schäden auftreten. Der KYO Cenloc ist in drei Varianten erhältlich: "Rack" für Serverschränke, "Wall" zur Wandmontage und als "Kit" für eigene Aufbauten.

A micro-electromechanical spring-mass-system is continuously measuring the acceleration and transforms the measured data into an analog 4-20mA output signal. The sensor complies with the standards of DIN EN 50155 for railway vehicles. It is espacially intended to be used in the on-board network of rail vehicles. Its extrem rugged housing enables applications in harsh conditions in the outskirt area of the vehicle, directly at the bogie. The sensor impresses by its high ruggedness against impact, dust as well as moisture and guarantees high reliability. The device detects accelerations in a measuring range of ± 4g and operates with 110 Volt supply voltage. Housing:stainless steel Axes:1 Measurment range:±4g Interface:Analogue I Supply voltage:110 Volt Sensitivity [mA/g]:2

CoriSENS is a rotation rate sensor for measuring angular velocity ω. It detects rotational movements using a MEMS gyroscope. This measuring signal in a range of ± 20° / s is converted by the sensor electronics and transmittes an analog current signal as well as voltage signal in addition. The sensor is certified according to uniform standards for electronic equipment on rail vehicles (DIN EN 50155) and can be operated directly with the usual onboard supply (24 V). Supply voltage:24 V Sensitivity:100 mV/°/s & 0,4 mA/°/s Measuring range [°/s]:± 20

CoriSENS is a rotation rate sensor for measuring angular velocity ω. It detects rotational movements using a MEMS gyroscope. This measuring signal in a range of ± 20° / s is converted by the sensor electronics and transmittes an analog current signal as well as voltage signal in addition. The sensor is certified according to uniform standards for electronic equipment on rail vehicles (DIN EN 50155) and can be operated directly with the usual onboard supply (110 V). Supply voltage:110 Volt Sensitivity:100 mV/°/s & 0,4 mA/°/s Measuring range [°/s]:± 20